MattBooker.info

Welcome back to the penultimate post of the ultimate Ravage tail mod guide!

Step 5, Why modders should own a pin vise.

Next up we have to drill a hole through each of the regular sections. Here’s where a pin vise comes in handy. You need something to hold a small drill bit, and a drill is probably going to be to much to use for something as small and precise as what needs to be done for this mod.

(more…)

A challenger approaches! It’s another post in the ultimate Ravage tail mod guide!

Step 4, Obtain Twist Tie!

Well, go get one.

(more…)

Next up in the ultimate Ravage tail mod…

Step 3, Bob Tail!

Next you need to cut each usable section of the tail apart from the others. A usable section is just the ordinary parts, not the bits with joints already.

(more…)

Step 2, Unscrew Rear

Barring Sunstreaker (or because of him, rather), how many of my toys have asked Ratchet about that command line?

Alright, alright. So first, we’re going to remove the tail itself. To do this, we can’t just yank it out because a pin is holding it in there pretty tight. We’ll have to rearrange some parts to get the screws, but-

(more…)

Step 1, Cut a hole in the box.

*looks around*

Well, that was easy.

Step 2, Put your-

(more…)

A guide on giving Ravage an articulated tail.

And by articulated tail, I mean fully articulated.

And by fully articulated, I mean 18 points of articulation in the tail (19 if you count gray barb on the tip).

Still interested? Then read on, dear reader!

(more…)